Electronic Payments

Unistrut Buffalo Supports

Gripple Hanger System

The unique Gripple Hanger System has revolutionized the industry of suspension & bracing. Widely recognized as the world's fastest and most cost effective way of installing electrical, meachanical, and other suspended services.

The whole essence of using Gripple to suspend fixed loads is to save time and money. Gripple is a natural replacement for threaded rod or chain for a number of reasons.

Each kit is composed of a length of steel wire rope with a choice of "end fixings", a Gripple to adjust the free end, and a setting key.

  • Fast (as much as 6 times quicker to install)
  • Versatile & Simple to Use
  • Strong but lightweight
  • Safe and aesthetically pleasing to the eye
  • Gripple Hangers are supplied as a complete kit ready for use
View More
/Public/Images/product/1243019079.jpg
Gripple Loop End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for choking around bar joists, strut, purlins, beams, roof trusses and other accessible building features.
 
Cable and Loop End Fixing Sizes:
No. 1 with 1-3/16" diameter loop 
No. 2 with 1-3/16" diameter loop
No. 3 with 1-3/16" diameter loop
No. 4 with 1-3/4" diameter loop
No. 5 with 1-3/4" diameter loop
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable size and length.
More Info
---
Choose Options
View More
1243015126.jpg
Gripple Toggle End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for light fixtures, metal decking, and other pre-drilled structures.
 
Cable and Toggle End Fixing Sizes:
No. 1 with 5/16" toggle 
No. 2 with 5/16" toggle
No. 2 with 1/4" toggle
No. 3 with 3/8" toggle
No. 4 with 1/2" toggle
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable and end fixing size, and cable length.
More Info
---
Choose Options
View More
1243021201.jpg
Gripple Stud End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for anchoring into concrete structures, metal decking, metal brackets using nuts, and clamps and clevis hangers.
 
Cable and Stud End Fixing Sizes:
No. 1 w/ 1/4'' x 1" thread
No. 2 w/ 1/4'' x 1" thread
No. 3 w/ 1/4'' x 1" thread
No. 2 w/ 1/4'' x 2" thread
No. 3 w/ 1/4" x 2" thread
No. 2 w/ 3/8" x 1-3/4" thread
No. 3 w/ 3/8" x 1-3/4" thread
No. 4 w/ 3/8" x 1-3/4" thread
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable and fixing size, and cable length.
More Info
---
Choose Options
View More
1244032084.jpg
Gripple End Stop End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for lighting channels, track, and other channel fixtures.
 
Cable and End Stop Fixing Sizes:
No. 1 with 5/32" body, 1/4" diameter stopper 
No. 2 with 1/4" body, 5/16" diameter stopper 
No. 3 with 1/4" body, 3/8" diameter stopper
No. 4 with 11/32" body, 1/2" diameter stopper
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable size and length.
More Info
---
Choose Options
View More
snaphookendfix_w 460.jpg
Gripple Snap Hook and Mini Snap Hook End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Quick and easy attachment to beam and purlin clips, cable basket and tray, light fixtures, or any service or clip with a 1⁄4” hole.
 
Snap Hook Hanger Fixing Sizes:
No. 1 with 3/16" diameter hook, 1/4" opening (Mini Hook)
No. 1 with 1/4" diameter hook, 5/8" opening 
No. 2 with 1/4" diameter hook, 5/8" opening 
No. 3 with 1/4" diameter hook, 5/8" opening 
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable and fixing size, and cable length.
More Info
---
Choose Options
View More
Gripple_EF_CladdingHook.jpg
Gripple Cladding Hook End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for fastening through metal decking roof structures.
 
Cable and End Stop Hanger Fixing Sizes:
No. 1 with 15/16" overall hook width 
No. 2 with 15/16" overall hook width 
No. 3 with 1" overall hook width
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable size and length.
More Info
---
Choose Options
View More
1243974162.jpg
Gripple Barrel End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for use on signage and light fixtures.
 
Cable size and Barrel Hanger Fixing Sizes:
No. 1 with 1/4" male thread, 7/16" diameter barrel 
No. 2 with 1/4" male thread, 7/16" diameter barrel
No. 2 with 3/8" male thread, 1/2" diameter barrel
No. 3 with 3/8" male thread, 1/2" diameter barrel
 
Standard Cable Lengths: 5-30ft. Other lengths available on request.
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable and fixing size, and cable length.
More Info
---
Choose Options
View More
1243345848.jpg
Gripple Straight Eyelet End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
For fixing sideways into wood beams, speakers or visual display, light fixtures, or other applications requiring bolting to brackets or fixtures.
 
Cable and Straight Eyelet Fixing Sizes:
No. 1 with 1/4" diameter hole, 3/8" eyelet 
No. 2 with 1/4" diameter hole, 3/8" eyelet 
No. 3 with 1/4" diameter hole, 3/8" eyelet 
 
Standard Cable Lengths: 5-30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable size and cable length.
More Info
---
Choose Options
View More
Gripple_EF_45DegEyelet.jpg
Gripple 45 Degree Eyelet End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for sway bracing services at a 45° angle from concrete, steel or wood, using appropriate fasteners (not for seismic bracing).
 
Cable size and Straight Eyelet Fixing Sizes:
No. 2 with 3/8" diameter hole, 7/8" eyelet 
No. 3 with 3/8" diameter hole, 7/8" eyelet 
 
Standard Cable Lengths: 5-30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable size and length.
More Info
---
Choose Options
View More
/Public/Images/product/Gripple_90EyeletEnd.jpg
Gripple 90 Degree Eyelet End Fixing Hanger
Part of the standard Gripple Hang Fast (HF) range.
 
Ideal for shot firing into concrete or steel.
 
Cable and 90 Degree Eyelet End Fixing Sizes:
No. 1 with 1/4" diameter hole, 1" eyelet 
No. 2 with 1/4" diameter hole, 1" eyelet 
No. 3 with 1/4" diameter hole, 1" eyelet 
No. 3 with 3/8" diameter hole, 1-3/4" eyelet 
No. 3 with 1/2" diameter hole, 1-5/8" eyelet 
 
Standard Cable Lengths: 5 – 30ft. Other lengths are available on request so feel free to contact us!
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Select cable and fixing size, and length.
More Info
---
Choose Options
View More
Trapeze Old No3.jpg
Gripple No. 3 Trapeze
Purpose-made single channel Gripple, ideal for use with strut support.
 
Ideal for fast suspension of strut trapeze systems for support of rectangular duct, cable basket and ladder, conduit racks, etc.
 
Trapeze No.3
• Ideal for fast suspension of strut trapeze systems for support of rectangular duct, cable basket and ladder, conduit racks, etc.
• Slots easily into strut
• Release pin allows rapid height adjustment
• Load rated at 200 lbs with a 3:1 safety factor
• Supplied as a ready-to-use kit
• ideal for use with the Trapeze Bracket
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple trapeze clips.
 
End fixing choices also pictured.
 
Select your options below.  Other lengths and fixings are available on request so feel free to contact us!
More Info
---
Choose Options
View More
Gripple_DUCT TRAPEEZ_Loop.jpg
Gripple Duct Trapeze

Single-channel Gripple with integral bracket, ideal for rapid suspension of rectangular duct, fan coil units, and other suitable services.

• 3 attachment points for screws
• Pin allows rapid adjustment
• Load rated at 100 lbs with a 5:1 safety factor
• Supplied as a ready-to-use kit
• Optional rubber pad available
 
Cable Size No. 2
Lengths: 5 – 30ft.

Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple trapeze clips, and a release key.

Other lengths are available on request.

Choose your options below.

More Info
---
Choose Options
View More
Y-Fit toggle.jpg
Gripple Y-Fit Hangers
Single hanger with double attachment points at service improves center of gravity.
 
• Ideal for light fixtures, cable basket, and other suitable services.
• Available in a range of end fixings, with a variety of leg lengths.
• Final installation angle at the ferrule should not exceed 60°
• Hook version is ideal for use with the G-Bracket.
 
Height Product recommendation:
< 6.5 ft use Y-Fit
> 6.5 ft Y-Fit use accessory with a Standard Gripple HF
 
Sold in bags of 10: Includes: 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
NOTE: 
* 1/4" Toggle is not available with a No.1 or No.3 size cable here.
* Hook Hangers are only available with 18" (460mm) legs here.
 
Lengths and end fixing configurations not available here may be obtained by special request.
 
Select options below.
More Info
---
Choose Options
View More
Y-Fit Accessory.jpg
Gripple Y-Fit Accessories
Accessory version of a Y-Fit to be used in Y-Fit accessory  conjunction with a Standard Gripple HF.
 
• Ideal for long drops; allows flexibility of end fixings at top and bottom of complete assembly.
• Ideal for light fixtures, cable basket, and other suitable services.
• Available in a range of end fixings, with a variety of leg lengths.
• Final installation angle at the ferrule should not exceed 60°.
• Hook version is ideal for use with the G-Bracket.
 
Height Product recommendation:
< 6.5 ft use Y-Fit
> 6.5 ft Y-Fit use accessory with a Standard Gripple HF
 
Sold in bags of 10: Includes: 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
Other lengths and end fixing configurations are available on request.
 
Select options below.
More Info
---
Choose Options
View More
Loop Stainless.png
Gripple Stainless Steel Hangers
 
Used to suspend a variety of mechanical and electrical services in the food industry and high humidity environments.
• Stainless steel body and springs are corrosion resistant and long-lasting.
• Ceramic wedges for extra strength and corrosion resistance.
• Aesthetically discreet and lightweight.
• Available in two load rated sizes up to 200 lbs.
• Supplied as a ready-to-use kit.
 
Standard Cable Lengths: 5 – 30ft.  Other lengths are available on request.
 
Sold in bags of 10. Includes 10 cables w/ end fixing, 10 gripple clips, and a release key.
 
NOTE: Only the Loop and Stud Hangers are available with a No. 3 cable here.
 
Plese contact us for a quote on any special requests.
 
Select fixing size and cable length.
 
More Info
---
Choose Options
View More
Gripple_UniversalClamp.jpg
Gripple Universal Clamp

Universal clamp for hanging all types of pipework within mechanical and plumbing services.

• Universal - for pipe sizes 3⁄8” to 2 ½” diameter
• Up to 6 times faster than traditional methods
• Replaces more than 11 different pipe clamp sizes
• Ready to use, retractable sleeve pre-fitted to wire rope
• Improved insulation against vibration
• No tools are required for installation
• Easy site storage, reduces waste, no risk of losing screws on site
• Simplifies take-off process calculation
• Lloyd’s certified
• Ideal for use with the Y-Pipe
 
Comes with or w/o rubber pad or or full acoustic insulation. 
Sold in bags of 10. 
 
Select you desired product below.
More Info
---
Choose Options
View More
Gripple_CableStrutKit.jpg
Cable Strut Kit with 1/8” or 1/4''
Cable Strut kits create secure, overhead spans by running high strength cables horizontally between two fixed points. Ideal for suspending Lighting, Signage, HVAC, Electrical and Mechanical.
 
• Up to 6 times faster than strut and brackets
• Eliminates cutting strut
• Reduces time spent working at heights
• More aesthetic and lighter than strut
• Easy to store and handle on-site
• More environmentally friendly, CO2 reduction
• 1⁄8” Light Duty size, and 1⁄4” Heavy Duty size
• For use with the C-Clip hanger
 
Kit comprises length of cable, adjustment key, and two Lockable Gripple fasteners (1⁄4” kit) or two standard Gripple fasteners (1⁄8” kit).
 
Other lengths are available on request so feel free to contact us!

Sold in sets of 10 kits.

Select strut size and cable length.

More Info
---
Choose Options
View More
Gripple_C-Clip with Loop.jpg
C-Clip Loop Hangers
An innovative, twist-on device for hanging anywhere along horizontal cable strut. 
1⁄8” C-Clip for 1⁄8” Cable Strut
1⁄4” C-Clip for 1⁄4” Cable Strut
 
• Up to 10 times faster to install
• Allows horizontal and vertical adjustment
• Cams lock solidly in place even at angles up to 60°
• Ready-to-use kit
• Can be fitted retrospectively
• No tools needed
• Use to suspend any No.2 Gripple cable hanger
• Available in two sizes up to 100 lbs SWL, with a 5:1 safety factor
• For use with the Cable Strut system
 
Kit comprises a length of cable pre-attached to the C-Clip and a Gripple Lockable fastener. 5:1 safety factor. Other cable lengths are available upon request.
Sold in sets of 10.
 
Choose you options below.
More Info
---
Choose Options
View More
/Public/Images/SEO/UNISTRUT/Gripple/Gripple-C-Clip-0.25-inch.jpg
C-Clips - Individual

Use individual C-Clips as an add-on to any No.2 cable hanger. Available in 1/8" and 1/4" sizes.

Sold in packs of 10.

Make your selection below.

More Info
---
Choose Options
View More
Gripple_Drop-InAnchor.jpg
Gripple Drop-in Anchor
Punch activated drop-in anchors for fixing into concrete with stud end. 
 
• Suitable for non-cracked concrete, precast hollow concrete and hard natural stone.
• Internal threaded anchor with flared end for easy setting.
• Ideal for use with Stud end fixing.
 
Drop-in Anchor Sizes: 1/4" or 6mm metric (also referred to as 1/8").
 
Sold in bags of 10.
 
Select size below.
More Info
---
Choose Options
View More
Gripple_WireAnchor.jpg
Gripple Wire Anchor

Anchors into drilled hole in concrete.

• Suitable for non-cracked concrete, precast hollow concrete and hard natural stone

• Stainless steel (304)

Max safe working load, 165lbs.

Sold in bags of 10.

More Info
$4.50
Buy
View More
Shot Fire.png
Gripple Ceiling Clip
Loop is located in the valley of the clip. For Concrete or Steel the nail is then shot-fired into concrete deck or steel beam. For Wood a pilot hole is drilled and then the screw is put in. During firing or screwing the nail or screw closes the clip, completely entrapping the loop but still allowing pivotal movement of the cable.
 
Three sizes of fasteners:
3/4" long shot fired pin for Steel 
1-1/4” long shot fired pin for Concrete
1-1/4" long x 1/4" screw for Wood
 
For use with loop hanger sizes No. 1-3.
 
Sold in bags of 10
More Info
---
Choose Options
View More
beamclip.jpg
Gripple Beam and Purloin Clips
Ideal for attaching Gripple Hangers, particularly when access or drilling restrictions are encountered.

Four types available in various sizes.
Sold in boxes of 100 - price is per box.
 
Select desired product below.
More Info
---
Choose Options
View More
Gripple_T-BarTwistClip.jpg
Gripple T-Bar Twist Clip
Twist clip for supporting fixtures, etc. below a ceiling grid.
 
• Ideal for attaching to suspended ceilings
• Integral 1⁄4” male thread designed to be used with 1⁄4” Barrel end fixing
 
Sold in bags of 10.
More Info
$5.30
Buy
View More
Gripple_LightFixtureHB_LSK.jpg
Gripple Light Fixture Hanging Bracket / LSK Clip
• General purpose clip to support light fittings
• Designed to fit into 7⁄8” knockouts on top of light fixtures
• Steel with zinc plated finish
 
Max SWL 18 lbs.
 
Sold in bags of 10.
More Info
$5.50
Buy
View More
Gripple_V-Bracket.jpg
Gripple V-Bracket

Attaches to top of light fixture. Fits into mounting holes.

• Front mount bracket for top of light fixtures (VFM)
• Side mount bracket for top of light fixtures (VSM)
• Easily fits into mounting holes
• Steel with zinc plated finish

Sold in bags of 10.

Select your choice below.

More Info
---
Choose Options
View More
Gripple_SpringClip.jpg
Gripple Spring Clip
• Used for attaching to top of light fixtures with 1⁄4” holes
• Ideal for use with the Standard Gripple HF
 
Max SWL 66 lbs.
 
Sold in bags of 10.
More Info
$2.70
Buy
View More
Gripple_AdaptorUnit.jpg
Gripple M8 and M6 Adaptor
M6 thread length 3/4”.
Head hole 1/8" 
Max safe working load 200 lbs.
 
M8 thread length 1”.
Head hole 1/4"
Max safe working load 500 lbs.
 
• Ideal for fixing to many services such as light fixtures
• Can be fixed into concrete ceilings using a metric Drop-in anchor
• Available in metric threads only
 
Sold in bags of 10.
More Info
---
Choose Options
View More
G-Bracket.jpg
Gripple G-Bracket

For suspending cable basket. Use with Y-Hook. (100MM, 200MM or 300MM)

• Unique, balanced hanger for cable tray and basket
• Brackets can be easily joined together either vertically or horizontally with coupling bolts
• Designed for use with the Y-Fit and Y-Fit accessory

Sold in bags of 10.

Select size below.

More Info
---
Choose Options
View More
Gripple_TrapezeBracket_HF.jpg
Gripple Trapeze Bracket
• Attaches to rectangular duct with #10 3⁄4” self-drilling screws
• Replaces the need for threaded rod or duct strap
• Rigid 14 gauge galvanized steel
• Use with the No.3 Trapeze hanger
 
Sold in bags of 10.
More Info
$9.80
Buy
View More
Trapeze Old No3.jpg
Gripple No. 3 Trapeze Fastener
Purpose made one-way Gripple
 
• For use with multi-tiered installations
• Combine with the Trapeze kit or the Standard Gripple HF No.3
 
Load rated at SWL 200 lbs. Designed for use with strut or multi-tiered installations.
 
Sold in bags of 10.
More Info
$42.50
Buy
View More
flag key.jpg
Adjustment Keys
• For adjusting the height of the Gripple hanger (pre-load)
• Three types and 6 sizes available
 
Easy Grip Release Key
A soft feel plastic handle mounted key for releasing the Gripple self locking fastener
KEY-P111146 for use with sizes No. 1-3.
KEY-P111147 for use with sizes No. 4-5.
 
Standard Release Key
KEY-HF for sizes No.1-3.
KEY-NO4 for size No.4.
KEY-6/13MM for size No.5.
 
Blue Flag Key
KEY-FLAG for sizes No.1-3.
 
Sold in bags of 10.
 
Select your choice below.
More Info
---
Choose Options
View More
/Public/Images/product/GrippleA_WireCutterSM.jpg
Gripple Wire Rope / Cable Cutters

The Gripple Wire Rope Cutting Tool was specifically designed to cut wire cable. It is both more efficient and effective than a set of wire cutters, and leaves a cleaner end.

• Hardened, durable jaws
• Two sizes available – Small for use on No.1-No.4 cable or Large providing greater leverage for the No.5 cable.
 
Small Cutters
Part no. CUTTER-GRIPPLE
Purpose made tool for cutting cable up to 3/16" diameter.
Herdened jaws for durability.
Suitable for use on Gripple cable sizes No.1 - No.4.
 
Large Cutters
Part no. CUTTER-1/4
Cable cutters for larger Gripple No. 5 (1/4") diameter cable.
Comfortable non-slip grip handles with an easy cutting action.
 
Price is per each.
 
Make your selection below.
More Info
---
Choose Options
View More
Gripple_CornerSaddle.jpg
Gripple Corner Saddle
A right-angled reinforcement molding for positioning and supporting Gripple Hangers sizes No. 1 - 3 on rectangular duct.

Designed for rectangular duct work.
 
• Helps prevent cable friction on rectangular ducting
• Use with cable sizes No.1 to No.4
 
Available with or without magnetic fixing by special request.
 
Sold in bags of 10.
More Info
$2.40
Buy