Parking Lot Sign System
|
The Parking Lot Sign System includes a durable, light-weight plastic post and a high impact resistant UV-stabilized resin base. Posts are made of 1.75" square white plastic x-tube, with two internal corner-to-corner reinforcing cross beams, and are constructed out of UV-stabilized polymers. The X-Tube Post provides superior impact resistance and is designed to bend when struck, then return to its original vertical orientation. In addition to their resilience, these posts are also able to withstand a full spectrum of weather conditions. Posts are available in lengths of up to 8ft and come pre-drilled to for installation of 12" x 18" signs. Bases are very durable and high impact resistant. They have a very small footprint, which is designed to conserve space and reduce tripping hazards. Bases can easily and quickly be installed with either bolts (4 bolts - 1 per corner), or 2-part roadway epoxy. Bases can also be used with 1.75" square steel tube. |
|
|
 |
Click on the PDF Button to the left to download detailed product information | |
Traffic Safety Products->Parking Lot and Pavement Accessories->Parking Lot Sign System
- Parking Lot Sign Kit
Kit includes an 1.75" white plastic X-Tube Post with pre-drilled holes to accommodate a 12" x 18" sign and an 8" x 8" resin base.
Both post and base offer superior impact resistance and are also UV-stabilized to withstand harsh sunlight conditions.
Choose post length below
-
- More Info
- ---
- Replacement Post for Parking Lot Sign System
1.75" white plastic X-Tube Post, with pre-drilled holes to accommodate a 12" x 18" sign. Post will bend when struck, then return to its original vertical position without damaging vehicle. Post is UV stabilized to withstand harsh sunlight.
Choose post length below
-
- More Info
- ---
- Replacement Base for Parking Lot Sign System
8" by 8" black resin base is high-impact-resistant. It is is also UV stabilized to withstand harsh sunlight. The small footprint and low profile of the parking lot base help to reduce tripping hazards in busy parking lots. Base upright is designed to receive a 1.75" square tube (plastic or steel).
The parking lot base has an array of easy installation methods. For permanent installation to asphalt or concrete, use either (4) bolts or the 2-part roadway epoxy. For temporary installation, use hot melt adhesive butyl pads.
-
- More Info
- $33.08
Buy
- 4'' Asphalt Bolt for Parking Lot Sign System
4" bolt for use in mounting the base of the Parking Lot Sign System to asphalt parking lots, or roads. Each base requires 4 bolts.
-
- More Info
- $2.72
Buy
- 2-1/2'' Concrete Bolt for Parking Lot Sign System
2-1/2" bolt for use in mounting the base of the Parking Lot Sign System to concrete sidewalks and curbs. Each base requires 4 bolts.
-
- More Info
- $2.28
Buy
- Two-Part Roadway Epoxy for Parking Lot Sign Kit
Two-Part epoxy kit, for permanent mount applications, includes 1 unit each of: EAS-6 Part A Epoxy Resin, and EAS-6 Part B Curing Agent.
*** due to hazardous material restrictions this item can only be shipped ground ***
Choose size below
-
- More Info
- ---
- Hot Melt Adhesive for Parking Lot Sign Kit
8" by 8" hot melt thermoplastic adhesive butyl pad for temporary mounting applications. Use one butyl pad per parking lot base.
-
- More Info
- $8.78
Buy
- Quick Release Pin for Parking Lot Sign Kit
Sign posts are quickly secured to the base using the quick release pin - no tools required.
-
- More Info
- $7.48
Buy
- Post End Cap for Parking Lot Sign Kit
1.75" by 1.75" by 2" deep black plastic end cap. Cap slides over the end of the 1.75" Plastic X-Tube Post to prevent water and debris from collecting inside the post.
-
- More Info
- $2.26
Buy
